Estimated Arrival: Between Sep 24 and Oct 03. in the USA Only.
Shipping & Returns: Free Shipping to the continental US.
- Sensor isolated from moisture of water cartridge.
- Easy-to-use. Fill cartridge with DISTILLED WATER. Pour out excess water. Pushing the control unit until it clicks into place. Connect the power cord and power on the humidifier. Set humidity value and put it in your Humidor.
- Precise humidity measurement and 100% factory inspected to meet +/-3% accuracy. Calibration available by user within -5~+5.
- Robust and easy connection. Audio and display for 'lack of water'
- Setting humidity value by user to best taste.
Binding: Health and Beauty
model number: S1-U-002
Part Number: S1-U-002
S1 is an electronic cigar humidifier that is similar as M1 but with short cartridge for small size humidors up to 3 cubic feet size with 150 cigar capacity. The humidity inside the humidor is measured by a built-in high accurate digital sensor. The micro-processor controls the quiet fan to run to blow moist airflow into the humidor according to the measured humidity value.The humidifier is factory set at 70% and can be adjusted from 60 to 80 by user to best taste. -5~+5 calibration date can be set by user. The sponge in the cartridge is water pre-soaked.How to install the humidifier?
Fill cartridge with CLEAN WATER until sponge is saturated. Pour out excess water from cartridge. Push the control unit until it clicks into place with alignment marks are aligned.
How often to add water to S1 for a table humidor?
Normally once a month and depends on the size, sealing status of humidor and environmental humidity.
Can the Humidifiers be used with moisturizing liquid?
No, only CLEAN WATER can be used. Please DO NOT use any other chemical liquid that could damage the humidity sensor.
Can the Humidifiers be used with a battery?
The humidifiers can be used with a 5V external battery BUT most cellphone power banks with low current shut-down function will shut down when the fan stops.
Why does my S1(or M1) indicate 'H2O' however the cartridge is full of water?
'H2O' indicates 'lack of water' when the measured humidity value is continuously 10% at least lower than the setting humidity value for two hours. If the humidor is too big, or not sealed well, or with cooling function and the humidifiers are not enough to raise the humidity to close to setting value for 2 hours, the humidifier could alarm for 'lack of water' .
Can the humidor be sealed well with the power cord?
The thin paper ribbon cable be used for passing through the seam of the lid and keep air-tightness.
Package Dimensions: 7.4 x 7.0 x 2.1 inches